Close

Setting The Time & Date

Setting Your Watch

SETTING YOUR WATCH

All KYBOE! watches are fitted with a screw down crown that must be unscrewed to set the time and date.

The crown is the center knob on the right side of your watch.

After setting the time and date, screw down the crown firmly. Never over tighten the crown as it will damage the gaskets inside.

SETTING THE TIME

SETTING THE TIME

Unscrew and pull up on the crown (the center knob on the side of your watch). The second hand will stop moving.

Now, you can turn the crown forward or backward to your desired time setting.

Afterwards, push the crown back down and screw firmly, careful not to overtighten, saving your time settings.

SETTING THE CALENDAR

SETTING THE CALENDAR

Unscrew and pull up on the crown (the center knob on the side of your watch). The second hand will stop moving.

Now, you can turn the crown forward or backward to your desired date setting.

Afterwards, push the crown back down and screw firmly, careful not to overtighten, saving your date settings.


OPERATING THE CHRONOGRAPH

KYBOE! chronograph watches feature two additional buttons: Button A, above the crown, and Button B, below the crown. KYBOE! chronographs also come in two sizes, 48mm and 55mm. The 48mm is a mini-second chronograph (6 o’clock position) with a quick reset function, while the 55mm is a center hand chronograph.

To operate the chronograph:

  • Make sure the crown is screwed in position.
  • Press Button A to start.
  • Press Button A again to stop.
  • Press Button A again to restart.
  • Press Button B to reset.

When resetting, the second counter (chronograph) hand should return to its home position at 12 o’clock. If the counting hand should fail to return to its home position, unscrew the crown, pull it to position two (2) and the watch will stop. Press Button A to make the counter hand will advance one (1) second each time it is pressed. Continue pressing Button A until the second hand is back to its home position, then reset the crown.


BATTERY REPLACEMENT

Please have the batteries replaced by a qualified watch technician as needed, and ensure that the proper size and quality of batteries are used for replacement. You must change batteries as soon as they die. Leaving dead batteries inside the watch may cause your KYBOE! to become inoperable and will not be covered under the Limited Warranty.

Model Watch Battery LED Battery
40mm, 48mm and 55mm with three hands SR626SW x 1 CR2016 x 2
48mm and 55mm with giant calendar SR626SW x 1 CR2016 x 2
48 Chronographs SR621SW CR2016 x 2
55 Chronographs SR927W CR2016 x 2

WATER RESISTANCE

Your KYBOE! is designed to be water resistant to a depth of 100 meters but it is not designed for sports diving. A watch’s water resistance is not a permanent guarantee. It may be affected by the aging of the gaskets or by an accidental shock to the watch.

In order to prevent water from entering the mechanism, never operate the buttons while the watch is submerged under water.